The final preparation of the secondary MX machine is now almost complete. To ensure that nobody was left waiting I delayed sending out this months invoices until I could be sure it would be ready.

If you're like to test your mail against the new MX machine please do, the address to use is:

• backup.mail-scanning.com

This machine is a completely independant from the primary MX, hosted in a different data-center on a different continent.

In the event that the primary MX machine fails the second should be able to continue working with a couple of caveats:

• Changes may not be made to the settings for a domain without manual intervention.
• The quarantine will no longer be updated in real-time.

Any changes you make to your domain will be reflected by the secondary within five minutes, and any mail which it rejects will make its way to the quarantine area within ten minutes. (There is a little lag to make sure there is not so much communication between master & secondary that either becomes unavailable for actually processing email).

Within the next few days the website will be updated to refer to both machines, and the support section of the site itself will be overhauled completely to make it more useful, and easier to use. Currently the backup MX has been tested as much as it can be, but there might be minor issues which only become obvious when the machine is used "for real".

I anticipate adding additional MX machines in the futures will take only a matter of hours; the migration to a completely "split" infrastructure required some significant architectural changes to the back-end, not to mention a lot of testing, both privately and with simulated traffic.

The secondary MX machine is now fully deployed and in use by over half our users; no last minute panic at all when the switchover was made, so I'm feeling pretty good about things right now!

The initial deployment of this additional machine was much slower than expected, because I needed to make significant changes to the way our service worked - It is pretty easy to setup a cluster these days, even a dynamic one using a shared/replicated database.

But the code that we run is a lot more involved than that. The ultimate goal of the secondary MX was to configure a box that would be able to handle mail processing in the event of the complete failure of the primary machine.

With that idea in place it became an interesting project to complete in its own right, and thanks to some brief moments of downtime I even demonstrated that this was possible.

Thankfully now that the second machine is in place adding a third, fourth, or even fifth machine will be trivial. Although I might have to come up with a naming policy for the new machines!

To celebrate the arrival of the secondary machine I've created a status page which will show the state of both boxes:

• http://status.mail-scanning.com/

(As with this blog, and our support system, this status check is hosted on a completely independant third machine :)

One of the things I was never keen on with our service was the extended setup. By that I mean that adding a new account required users to get in touch with support and ask for domains to be manually added to their accounts.

Now I'm happy to report that new domains may be added to our system with almost immediate effect.

You may now get started using our service with no need to get in touch:

1. Create an account.
2. Add your domain(s) to the account.
3. Make your configuration changes.
4. Update your DNS records.
5. Wait for mail to be delivered via our servers.

The whole process should be completely automatic, and all new domains will receive a free month of service!